Showing posts with label Austin Healey 3000 MkII. Show all posts
Showing posts with label Austin Healey 3000 MkII. Show all posts

Monday, June 28, 2010

Austin-Healey 3000 Car And The History Of It The End Parts

Austin-Healey 3000 Car And The History Of It The End Parts

Austin Healey CarsPicture Of Austin Healey Cars

The Austin Healey 3000 Mk III Cars was launched in October 1963, and remained in production until the end of 1967 when production of Austin Healeys finally ceased. (One further car was built in March 1968.) Classified as the BJ8, the new model was the most powerful and luxurious of the big Healeys, with a walnut-veneer dash, wind up windows, and 150 hp (112 kW) engine. Improvements to the engine included a new camshaft and valve springs, and twin SU 2" HD8 carburettors, together with a new design of exhaust system. Servo-assisted brakes were now fitted as standard. Only 2+2 seat versions were made. Option extras were similar to those offered for the MkII, the main change being that the standard interior trim was now Ambla vinyl, with leather seats being added to the list of options.

Austin Healey CarsPicture Of Austin Healey Cars

In May 1964 the Phase II version of the MkIII was released, which had a modified rear chassis to allow rear ground clearance to be increased, and subsequently, in March 1965 the car also gained separate indicators.

Austin Healey CarsPicture Of Austin Healey Cars

17,712 were made.

Wednesday, June 23, 2010

Austin-Healey 3000 Car And The History Of It Parts 3

Austin-Healey 3000 Car And The History Of It Parts 3

Austin Healey CarsPicture Of Austin Healey Cars

Introduced in March 1961, the Austin Healey 3000 Mk II Cars came with three SU HS4 carburettors and an improved camshaft, designated the BT7 MkII (4 seat version) and BN7 MkII (2 Seat version). However, upon the introduction of the BJ7 (2+2 seats) model in January 1962, the number of carburettors was reduced to two, (SU type HS6) due to the problems experienced with balancing three carburettors. As a result of the introduction of the BJ7, the BN7 MkII was discontinued in March 1962, and the BT7 MkII followed in June 1962. Externally, the main changes introduced with the BJ7 were a vertical barred front grille, wind up windows rather than side curtains, an improved hood, and a wrap-around windscreen. Optional extras were similar to the MkI, although the option of a factory hardtop was not available from the BJ7's introduction. From August 1961 a brake servo was also available as an optional extra, which greatly improved braking performance. The BJ7 was discontinued in October 1963 with the introduction of the 3000 MkIII.

Austin Healey CarsPicture Of Austin Healey Cars

A 3000 MkII BT7 with hardtop and overdrive tested by the British The Motor magazine in 1961 had a top speed of 112.9 mph (181.7 km/h) and could accelerate from 0-60 mph (97 km/h) in 10.9 seconds. A fuel consumption of 23.5 miles per imperial gallon (12.0 L/100 km; 19.6 mpg-US) was recorded. The test car cost £1362 including taxes.

Austin Healey CarsPicture Of Austin Healey Cars

11,564 were made (355 BN7 MkII, 5,096 BT7 MkII, and 6,113 BJ7).

Friday, April 30, 2010

Austin-Healey Car And The History Of It Parts 2

Austin-Healey Car And The History Of It Parts 2

Austin Healey CarsPicture Of Austin Healey 3000 Cars

The 1960s saw the introduction of the Austin Healey 3000 MkII. It sported dual carburetors and had a curved instead of straight front windshield. Although its top speed was reduced to 112.9 mph, its zero-to-60 performance increased to 10.9 seconds. Its fuel efficiency increased to 23.5 miles per gallon.


Austin-Healey CarsPicture Of 1967 Austin Healey Sprite Cars

The Austin Healey 3000 MkIII was produced from 1964 to 1967. The MkIII could achieve speeds in excess of 150 mph and had power-assisted brakes. Later MkIII models increased rear suspension travel to improve handling.


Austin Healey-CarsPicture Of 1956 Austin Healey 100 Cars

1961 saw the introduction of the Sprite MkII. Early MkIIs used the original 948cc engine, but later models used a 1098cc engine. Front disc brakes were introduced with the MkII, and wire wheels were offered as options.


Austin-Healey-CarsPicture Of Austin Healey Cars

The Sprite MkIII was made from 1964 to 1966 and featured improvements in comfort, with additional weight making the car less sporty. Handling was improved by changes to the rear leaf springs, and, for the first time, the car was fitted with locks.


Austin Healey Cars1Picture Of 1956 Austin Healey 100 Cars

In 1966, the final car of the Sprite line, the MkIV, was introduced. The MkIV sported a 1275cc engine, and moved from a trunk-stowed removable top to a permanently fixed hinged convertible top.

 
Austin-Healey Sprite